Rod Trimming Knife: F006

plastic floor install kits

Rod Trimming Knife for Flooring install 

The weld or joint seam is trimmed in two stages. During the precut the spacer claw is swung in place below the blade so that , as the cut is performed, a residual seam remains.

For the subsequent trimming cut, swing the spacer claw 90 degrees to the side and trim the seam flush with the material.

 

 

 

Send Inquiry

---

Rod Trimming Knife for Flooring, trimmer for rods, plastic rod trimmer, floor rods trimmer, Floor Carpet Trimming Skiving Knif